Windows 7 is not show in Grub2 after Boot-Repair
I asked this question in AskUbuntu, but nobody answered. So I ask here. My
Windows 7 is not seen from GRUB2 after Ubuntu installed. I have used
Boot-Repair to fix it, but Grub2 can only see Ubuntu. If I restore the MBR
with Boot-Repair, windows 7 boot automatically without Ubuntu. Is there
any way to let Grub2 display both windows7 and Ubuntu? Here is my boot
information from Boot-Repair
The following may or may not help, but when I run
sudo fdisk -l
It says Partition 4 does not start on physical sector boundary.
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x69aca7e3
Device Boot Start End Blocks Id System
/dev/sda1 63 80324 40131 de Dell Utility
Partition 1 does not start on physical sector boundary.
/dev/sda2 * 81920 19419135 9668608 7 HPFS/NTFS/exFAT
/dev/sda3 19421182 1278974027 629776423 f W95 Ext'd (LBA)
Partition 3 does not start on physical sector boundary.
/dev/sda4 1278982845 1465140549 93078852+ 7 HPFS/NTFS/exFAT
Partition 4 does not start on physical sector boundary.
/dev/sda5 19421184 272967679 126773248 7 HPFS/NTFS/exFAT
/dev/sda6 272969728 964309074 345669673+ 7 HPFS/NTFS/exFAT
/dev/sda7 1069281368 1278974027 104846330 7 HPFS/NTFS/exFAT
/dev/sda8 964311040 1067824711 51756836 83 Linux
/dev/sda9 1067827200 1069271039 721920 82 Linux swap / Solaris
Partition table entries are not in disk order
Disk /dev/sdb: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xba000000
No comments:
Post a Comment